Backpack 7.x-dev Backpack 6.x Backpack 5.x Backpack 4.1 Backpack 4.0 Backpack 3.6 Backpack 3.5 Backpack 3.4 Backpack 3.3
Edit

CRUD Fluent API

About

Starting with Backpack 4.1, working with Fields, Columns, Filters, Buttons and Widgets inside your EntityCrudController can also be done using a fluent syntax. For example, instead of doing:

$this->crud->addField([   // Number
    'name'   => 'price',
    'label'  => 'Price',
    'type'   => 'number',
    'prefix' => "$",
    'suffix' => ".00",
]);

You can now do:

$this->crud->field('price')
        ->type('number')
        ->label('Price')
        ->prefix('$')
        ->suffix('.00');

But you can go a little further, by using the CrudPanel class at the top of your controller with an alias:

use Backpack\CRUD\app\Library\CrudPanel\CrudPanel as CRUD;

CRUD::field('price')
    ->type('number')
    ->label('Price')
    ->prefix('$')
    ->suffix('.00');

Or maybe even condense it on just one line:

CRUD::field('price')->type('number')->label('Price')->prefix('$')->suffix('.00');

Those who prefer this new fluent syntax do so because:

  • method chains have better highlighting and suggestions in most IDEs;
  • method chains take up slightly fewer lines of code than arrays;
  • method chains are faster to write & modify than arrays;
  • you no longer have to decide if you're adding or modifying a field, since CRUD::field() basically functions as a CRUD::addOrModifyField();
  • it allows us to add methods that are exclusive to the fluent syntax, that will make our lives easier; for example, to make a field take up only 6 bootstrap columns, using the non-fluent syntax you'd have to write 'wrapper' => ['class' => 'form-group col-md-6'], - but using the fluent syntax you can just do size(6);

But keep in mind that it does have downsides: it's more difficult to debug and arguably makes it more difficult to understand how the admin panel works. Developers who are not already comfortable with Backpack might not understand that:

  • referencing $this->crud is the same thing as CRUD because it's actually a singleton, a "global" instance of the CrudPanel object, which gets defined in the Controller and is then read inside the views;
  • the fluent syntax merely turns those chained methods into an array, which gets stored inside $this->crud like it does with addField() or modifyField();

Fluent Fields

These methods should be used inside your CrudController for operations that use Fields, most likely inside the setupCreateOperation() or setupUpdateOperation() methods.

General

field('name') - By specifying field('name') you add a field with that name to the current operation, at the end of the stack, or modify the field that already exists with that name; it accepts a single parameter, a string, that will become that field's name; needs to be called directly, not chained;

CRUD::field('name');

Anything you chain to the field() method gets turned into an attribute on that field. Except for the methods below.

Chained Methods

If you chain the following methods to a CRUD::field('name'), they will do something very specific instead of adding that attribute to the field:

  • ->remove() - By chaining remove() on a field you remove it from the current operation;
CRUD::field('name')->remove();
  • ->forget('attribute_name') - By chaining forget('attribute_name') to a field you remove that attribute from the field definition array;
CRUD::field('name')->forget('suffix');
  • ->after('destination') - By chaining after('destination_field_name') you will move the current field after the given field;
CRUD::field('name')->after('description');
  • ->before('destination') - By chaining before('destination_field_name') you will move the current field before the given field;
CRUD::field('name')->before('description');
  • ->makeFirst() - By chaining makeFirst() you will make the current field the first one for the current operation;
CRUD::field('name')->makeFirst();
  • ->makeLast() - By chaining makeLast() you will make the current field the last one for the current operation;
CRUD::field('name')->makeLast();
  • ->size(6) - By chaining size(4) you will make the field span across this many bootstrap columns (instead of the default 12 columns which is a full row); it accepts a single parameter, an integer from 1 to 12; for more information and to see how you can create convenience methods like this one, see the PR;
CRUD::field('name')->size(6);

// alternative to
CRUD::addField([
    'name' => 'name',
    'wrapper' => ['class' => 'form-group col-md-6'],
]);
  • Do you have an idea for a new chained method aka. convenience method? Let us know.

Examples

// a text field
CRUD::field('last_name');

// an email field, put inside a tab and resized to half the width
CRUD::field('email')->type('email')->size(6)->tab('Simple');

// a number field with prefix and suffix (stored as fake in extras)
CRUD::field('price')->type('number')->prefix('$')->suffix(".00")->fake(true);

// a date picker field with custom options
CRUD::field('birthday')
        ->type('date_picker')
        ->label('Birthday')
        ->date_picker_options([
            'todayBtn' => true,
            'format'   => 'dd-mm-yyyy',
            'language' => 'en',
        ])
        ->size(6);

// a select field, half the width
CRUD::field('category_id')
        ->type('select')
        ->label('Category')
        ->entity('category')
        ->attribute('name')
        // ->model('Backpack\NewsCRUD\app\Models\Category') // optional; guessed from entity;
        // ->wrapper(['class' => 'form-group col-md-6']) // possible, but easier with size below;
        ->size(6);

// a select2_from_ajax field
CRUD::field('article')
        ->type('select2_from_ajax')
        ->label("Article")
        ->entity('article')
        // ->attribute('title') // starting with Backpack 4.1 this is optional & guessed
        // ->model('Backpack\NewsCRUD\app\Models\Article') // optional; guessed;
        ->data_source(url('api/article'))
        ->placeholder('Select an article')
        ->minimum_input_length(2);

// a relationship field for an n-n relationship
// also uses the Fetch and InlineCreate operations
CRUD::field('products')
        ->type('relationship')
        ->label('Products')
        // ->entity('products') // optional
        // ->attribute('name') // optional
        ->ajax(true)
        ->data_source(backpack_url('monster/fetch/product'))
        ->inline_create(['entity' => 'product'])
        // ->wrapper(['class' => 'form-group col-md-6'])
        ->tab('Others');

Fluent Columns

These methods should be used inside your CrudController for operations that use Columns, most likely inside the setupListOperation() or setupShowOperation() methods.

General

  • column('name') - By specifying column('name') you add a column with that name to the current operation, at the end of the stack, or modify the column that already exists with that name; takes a single parameter, a string, that will become that column's name and key; needs to be called directly, not chained; 
    CRUD::column('name');

Anything you chain to the column() method gets turned into an attribute on that column. Except for the methods below:

Chained Methods

If you chain the following methods to a CRUD::column('name'), they will do something very specific instead of adding that attribute to the column:

  • ->remove() - By chaining remove() on a column you remove it from the current operation;
CRUD::column('name')->remove();
  • ->forget('attribute_name') - By chaining forget('attribute_name') to a column you remove that attribute from the column definition array;
CRUD::column('name')->forget('suffix');
  • ->after('destination') - By chaining after('destination_column_name') you will move the current column after the given column;
CRUD::column('name')->after('description');
  • ->before('destination') - By chaining before('destination_column_name') you will move the current column before the given column;
CRUD::column('name')->before('description');
  • ->makeFirst() - By chaining makeFirst() you will make the current column the first one for the current operation;
CRUD::column('name')->makeFirst();
  • ->makeLast() - By chaining makeLast() you will make the current column the last one for the current operation;
CRUD::column('name')->makeLast();

Examples

// a text column
CRUD::column('last_name');

// a textarea column
CRUD::column('description')->type('textarea');

// an image column
CRUD::column('profile_photo')->type('image');

// a select column with links
CRUD::column('select')
        ->type('select')
        ->entity('category')
        ->attribute('name')
        ->model("Backpack\NewsCRUD\app\Models\Category")
        ->wrapper([
            'href' => function ($crud, $column, $entry, $related_key) {
                return backpack_url('category/'.$related_key.'/show');
            },
        ]);

// a select_multiple column
CRUD::column('tags')->type('select_multiple')->entity('tags');

// a select_multiple column with everything explicitly defined, plus links
CRUD::column('tags')
        ->type('select_multiple')
        ->label('Select_multiple')
        ->entity('tags')
        ->attribute('name')
        ->model('Backpack\NewsCRUD\app\Models\Tag')
        ->wrapper([
            'href' => function ($crud, $column, $entry, $related_key) {
                return backpack_url('tag/'.$related_key.'/show');
            },
        ]);

// a checkbox column that turns a boolean into green labels if true
CRUD::column('active')
        ->type('boolean')
        ->label('Active')
        ->options([0 => 'Yes', 1 => 'No'])
        ->wrapper([
            'element' => 'span',
            'class'   => function ($crud, $column, $entry, $related_key) {
                if ($column['text'] == 'Yes') {
                    return 'badge badge-success';
                }

                return 'badge badge-default';
            },
        ]);

// a select_from_array column
CRUD::column('status')
        ->type('select_from_array')
        ->label('Status')
        ->options(['1' => 'New', '2' => 'Processing', '3' => 'Delivered']);

// a model function column, with custom search logic
CRUD::column('text_and_email')
        ->type('model_function')
        ->label('Text and Email')
        ->function_name('getTextAndEmailAttribute')
        ->searchLogic(function ($query, $column, $searchTerm) {
            $query->orWhere('email', 'like', '%'.$searchTerm.'%');
            $query->orWhere('text', 'like', '%'.$searchTerm.'%');
        });

Fluent Buttons

These methods should be used inside your CrudController for operations that use Buttons, most likely inside the setupListOperation() or setupShowOperation() methods.

General

  • button('name') - By specifying button('name') you add a button with that name to the current operation, at the end of the stack, or modify the button that already exists with that name; takes a single parameter, a string, that will become that button's name; needs to be called directly, not chained; 
    CRUD::button('name');

Anything you chain to the button() method gets turned into an attribute on that button. Except for the methods listed below. Keep in mind in most cases you will still need to chain stack, view and maybe type to this method, to define those attributes. Details in the examples section below.

Chained Methods

If you chain the following methods to a CRUD::button('name'), they will do something very specific instead of adding that attribute to the button:

  • ->remove() - By chaining remove() on a button you remove it from the current operation;
CRUD::button('name')->remove();
  • ->forget('attribute_name') - By chaining forget('attribute_name') to a button you remove that attribute from the button;
CRUD::button('name')->forget('suffix');
  • ->after('destination') - By chaining after('destination_button_name') you will move the current button after the given button;
CRUD::button('name')->after('description');
  • ->before('destination') - By chaining before('destination_button_name') you will move the current button before the given button;
CRUD::button('name')->before('description');
  • ->makeFirst() - By chaining makeFirst() you will make the current button the first one for the current operation;
CRUD::button('name')->makeFirst();
  • ->makeLast() - By chaining makeLast() you will make the current button the last one for the current operation;
CRUD::button('name')->makeLast();

Examples

// ---------
// Example 1
// ---------
// instead of
$this->crud->addButton('top', 'create', 'view', 'crud::buttons.create');
// you can now do
CRUD::button('create')->stack('top')->view('crud::buttons.create');

// ---------
// Example 2
// ---------
// instead of
$this->crud->addButton('line', 'update', 'view', 'crud::buttons.update', 'end');
// you can now do
CRUD::button('edit')->stack('line')->view('crud::buttons.edit');

// ---------
// Example 3
// ---------
// instead of
$this->crud->addButtonFromModelFunction('line', 'open_google', 'openGoogle', 'beginning');
// you can now do
CRUD::button('open_google')
    ->stack('line')
    ->type('model_function')
    ->content('openGoogle')
    ->makeFirst();

// ---------
// Example 4
// ---------
// instead of
$this->crud->addButtonFromView('top', 'create', 'crud::buttons.create', 'beginning');
// you can now do
CRUD::button('create')->stack('top')->view('crud::buttons.create');

// ---------
// Example 5
// ---------
// instead of
$this->crud->removeButton('create');
// you can now do
CRUD::button('create')->remove();

// ------
// Extras
// ------
// but you don't have to give it a name, so you can also do
CRUD::button()->stack('line')->type('model_function')->content('openGoogle')->makeFirst();
// and we also have helpers for setting both the type to view/model_function and its content
CRUD::button()->stack('line')->modelFunction('openGoogle')->makeFirst();

// -------
// Aliases
// -------
// the "stack" attribute can also be set using the "group", "section" and "to" aliases
// all of the calls below do the exact same thing
CRUD::buton('create')->stack('top')->view('crud::butons.create');
CRUD::buton('create')->to('top')->view('crud::butons.create');
CRUD::buton('create')->group('top')->view('crud::butons.create');
CRUD::buton('create')->section('top')->view('crud::butons.create');

Fluent Filters

These methods should be used inside your CrudController for operations that use Filters, most likely inside setupListOperation().

General

filter('name') - By specifying filter('name') you add a filter with that name to the current operation, at the end of the stack, or modify the filter that already exists with that name; takes a single parameter, a string, that will become that filter's name; needs to be called directly, not chained;

CRUD::filter('name');

Anything you chain to the filter() method gets turned into an attribute on that filter. Except for the methods listed below. Keep in mind in most cases you will still need to chain type, logic, fallbackLogic and maybe apply to this method, to define those attributes and apply the appropriate logic. Details in the examples section below.

Main Chained Methods

  • ->type('date') - By chaining type() on a filter you make sure you use that filter type; it accepts a string that represents the type of filter you want to use;
CRUD::filter('birthday')->type('date');
  • ->label('Name') - By chaining label() on a filter you define what is shown to the user as the filter label; it accepts a string;
CRUD::filter('name')->label('Name');
  • ->logic(function($value) {}) - By chaining logic() on a filter you define should be done when that filter is active; it accepts a closure that is called when the filter is active - either immediately by further chaining apply() on the filter, or automatically after all filters are defined, by the List operation itself; you can also use ->whenActive() or ->ifActive() which are its aliases:
// logic method
CRUD::filter('active')
    ->type('simple')
    ->logic(function ($value) {
        $this->crud->addClause('where', 'active', '1');
    })->apply();

// whenActive alias
CRUD::filter('active')
    ->type('simple')
    ->whenActive(function ($value) {
        $this->crud->addClause('where', 'active', '1');
    })->apply();

// ifActive alias, left to be applied by the operation itself
CRUD::filter('active')
    ->type('simple')
    ->whenActive(function ($value) {
        $this->crud->addClause('where', 'active', '1');
    });
  • ->fallbackLogic(function($value) {}) - By chaining fallbackLogic() on a filter you define should be done when that filter is NOT active; it accepts a closure that is called when the filter is NOT active - either immediately by further chaining apply() on the filter, or automatically after all filters are defined, by the List operation itself; you can also use ->else(), ->whenInactive(), ->whenNotActive(), ->ifInactive() and ->ifNotActive() which are its aliases:
// fallbackLogic method, applied immediately
CRUD::filter('active')
    ->type('simple')
    ->logic(function ($value) {
        $this->crud->addClause('where', 'active', '1');
    })->fallbackLogic(function ($value) {
        $this->crud->addClause('where', 'active', '0');
    })->apply();

// else alias, left to be applied by the operation itself
CRUD::filter('active')
    ->type('simple')
    ->label('Simple')
    ->ifActive(function ($value) {
        $this->crud->addClause('where', 'active', '1');
    })->else(function ($value) {
        $this->crud->addClause('where', 'active', '0');
    });

Other Chained Methods

If you chain the following methods to a CRUD::filter('name'), they will do something very specific instead of adding that attribute to the filter:

  • ->remove() - By chaining remove() on a filter you remove it from the current operation;
CRUD::filter('name')->remove();
  • ->forget('attribute_name') - By chaining forget('attribute_name') to a filter you remove that attribute from the filter;
CRUD::filter('name')->forget('suffix');
  • ->after('destination') - By chaining after('destination_filter_name') you will move the current filter after the given filter;
CRUD::filter('name')->after('description');
  • ->before('destination') - By chaining before('destination_filter_name') you will move the current filter before the given filter;
CRUD::filter('name')->before('description');
  • ->makeFirst() - By chaining makeFirst() you will make the current filter the first one for the current operation;
CRUD::filter('name')->makeFirst();
  • ->makeLast() - By chaining makeLast() you will make the current filter the last one for the current operation;
CRUD::filter('name')->makeLast();

Examples

// instead of
CRUD::addFilter([
    'type'  => 'simple',
    'name'  => 'checkbox',
    'label' => 'Simple',
],
false,
function () {
    $this->crud->addClause('where', 'checkbox', '1');
});

// you can do
CRUD::filter('checkbox')
    ->type('simple')
    ->label('Simple')
    ->logic(function($value) {
        $this->crud->addClause('where', 'checkbox', '1');
    })->apply();

// or
CRUD::filter('checkbox')
    ->type('simple')
    ->label('Simple')
    ->whenActive(function($value) { // filter logic
        $this->crud->addClause('where', 'checkbox', '1');
    })->whenInactive(function($value) { // fallback logic
        $this->crud->addClause('inactive');
    })->apply();

// or 
CRUD::filter('checkbox')
    ->type('simple')
    ->label('Simple')
    ->ifActive(function($value) { // filter logic
        $this->crud->addClause('where', 'checkbox', '1');
    })->else(function($value) { // fallback logic
        $this->crud->addClause('inactive');
    })->apply();

// -------------------
// you can also now do
// -------------------
CRUD::filter('select_from_array')->label('Modified Dropdown');
CRUD::filter('select_from_array')->whenActive(function($value) {
    dd('select_from_array filter logic got modified');
})->apply();
CRUD::filter('select_from_array')->remove();
CRUD::filter('select_from_array')->forget('label');
CRUD::filter('select_from_array')->after('text');
CRUD::filter('select_from_array')->before('text');
CRUD::filter('select_from_array')->makeFirst();
CRUD::filter('select_from_array')->makeLast();

// --------------
// other examples
// --------------
// checkbox filter
CRUD::filter('checkbox')
    ->type('simple')
    ->label('Simple')
    ->logic(function($value) {
        $this->crud->addClause('where', 'checkbox', '1');
    })->apply();

// select_from_array filter
CRUD::filter('select_from_array')
    ->type('dropdown')
    ->label('DropDOWN')
    ->values([
        'one'   => 'One', 
        'two'   => 'Two', 
        'three' => 'Three'
    ])
    ->whenActive(function($value) {
        $this->crud->addClause('where', 'select_from_array', $value);
    })
    ->apply();

// text filter
CRUD::filter('text')
    ->type('text')
    ->label('Text')
    ->whenActive(function($value) {
        $this->crud->addClause('where', 'text', 'LIKE', "%$value%");
    })->apply();

// number filter
CRUD::filter('number')
    ->type('range')
    ->label('Range')->label_from('min value')->label_to('max value')
    ->whenActive(function($value) {
        $range = json_decode($value);
        if ($range->from && $range->to) {
            $this->crud->addClause('where', 'number', '>=', (float) $range->from);
            $this->crud->addClause('where', 'number', '<=', (float) $range->to);
        }
    })->apply();

// date filter
CRUD::filter('date')
    ->type('date')
    ->label('Date')
    ->whenActive(function($value) {
        $this->crud->addClause('where', 'date', '=', $value);
    })->apply();

// date_range filter
CRUD::filter('date_range')
    ->type('date_range')
    ->label('Date range')
    ->whenActive(function($value) {
         $dates = json_decode($value);
         $this->crud->addClause('where', 'date', '>=', $dates->from);
         $this->crud->addClause('where', 'date', '<=', $dates->to);
    })->apply();

// select2 filter
CRUD::filter('select2')
    ->type('select2')
    ->label('Select2')
    ->values(function() {
        return \Backpack\NewsCRUD\app\Models\Category::all()->keyBy('id')->pluck('name', 'id')->toArray();
    })
    ->whenActive(function($value) {
        $this->crud->addClause('where', 'select2', $value);
    })->apply();

// select2_multiple filter
CRUD::filter('select2_multiple')
    ->type('select2_multiple')
    ->label('S2 multiple')
    ->values(function() {
        return \Backpack\NewsCRUD\app\Models\Category::all()->keyBy('id')->pluck('name', 'id')->toArray();
    })
    ->whenActive(function($value) {
        foreach (json_decode($values) as $key => $value) {
            $this->crud->addClause('orWhere', 'select2', $value);
        }
    })->apply();

// select2_from_ajax filter
CRUD::filter('select2_from_ajax')
    ->type('select2_ajax')
    ->label('S2 Ajax')
    ->placeholder('Pick an article')
    ->values('api/article-search')
    ->whenActive(function($value) {
        $this->crud->addClause('where', 'select2_from_ajax', $value);
    })->apply();

Like our open-core?

Then you'll love our premium add-ons - productivity tools and tons of new features.

See Premium Add-ons